Editguy Posted July 29, 2018 Share Posted July 29, 2018 I noticed in my recent order that the tubes attached to the spray tops are a few inches too long to fit in the bottle. It's obviously easy to remedy with a pair of scissors, just making you aware of the issue. Link to comment Share on other sites More sharing options...
BHarris23 Posted July 29, 2018 Share Posted July 29, 2018 They’re designed to curl on the bottom so that it can reach those hard to get areas inside the bottle ChristopherOrris24 1 Link to comment Share on other sites More sharing options...
Editguy Posted July 29, 2018 Author Share Posted July 29, 2018 (edited) 13 minutes ago, BHarris23 said: They’re designed to curl on the bottom so that it can reach those hard to get areas inside the bottle These are noticeably longer compared to the dozen or so I have from previous orders. I can't get the cap to screw down without trimming them. Edited July 29, 2018 by Editguy Link to comment Share on other sites More sharing options...
tlbullet Posted July 29, 2018 Share Posted July 29, 2018 1 minute ago, Editguy said: These are noticeably longer compered to the dozen or so I have from previous orders. I can't get the cap to screw down without trimming them. Noticed that when i opened my C&C DS....like BHharris said, just push down on top and tighten it. It works fine!! But at first i def thought they were cut incorrectly. Link to comment Share on other sites More sharing options...
falcaineer Posted July 29, 2018 Share Posted July 29, 2018 Don't cut them...do as @BHarris23 alluded and @tlbullet said - just press down on the cap more and tighten. You'll be glad when the last few drops get used vs. sitting there and mocking you ?. Link to comment Share on other sites More sharing options...
JGardiol Posted July 29, 2018 Share Posted July 29, 2018 Too funny, i was thinking the exact same thing with the last batch i got. I held a new one up to the old and it was slightly longer, but just pushed the nozzle further down and tightened the top. Works fine so far. Link to comment Share on other sites More sharing options...
js1990 Posted August 12, 2018 Share Posted August 12, 2018 Or you can cut it and just dump the 3 remaining drops in to a new bottle... Link to comment Share on other sites More sharing options...
falcaineer Posted August 12, 2018 Share Posted August 12, 2018 29 minutes ago, js1990 said: Or you can cut it and just dump the 3 remaining drops in to a new bottle... Unless you cut it too short and wind up with 6 extra drops! But that would make a good entry for this thread. ? Link to comment Share on other sites More sharing options...
chasm31 Posted August 12, 2018 Share Posted August 12, 2018 The new length hasn't bothered me but in my latest mystery box I received a Windex looking sprayer. Threw me off guard when I first saw it. Worked fine in my eco wheel cleaner but it's definitely not the same quality feel. Link to comment Share on other sites More sharing options...
Wy_detailing Posted August 12, 2018 Share Posted August 12, 2018 Do you have a pic of it? Link to comment Share on other sites More sharing options...
chasm31 Posted August 12, 2018 Share Posted August 12, 2018 Definitely thinner profile Link to comment Share on other sites More sharing options...
Wy_detailing Posted August 12, 2018 Share Posted August 12, 2018 Weird, looks like one of their older style sprayers Link to comment Share on other sites More sharing options...
rrmccabe Posted August 12, 2018 Share Posted August 12, 2018 I am planning on cutting mine off or using sprayers out of my excess box. I refill most my products out of gallons anyway (so leaving 1/2" does not bother me). I have no intention of fighting an excess long siphon tube. Seems I end up filling bottles in the middle of a wash detail anyway when I don't have excess time. Link to comment Share on other sites More sharing options...
2Fords Posted August 12, 2018 Share Posted August 12, 2018 I sure hope they have not changed their spray heads again! The current ones have been the best ones for quite a while now. Hookem06 1 Link to comment Share on other sites More sharing options...
Nickfire20 Posted August 12, 2018 Share Posted August 12, 2018 The tubes on the older ones were longer like these also, its so you dont miss a drop of product at the bottom. Link to comment Share on other sites More sharing options...
js1990 Posted August 12, 2018 Share Posted August 12, 2018 (edited) 17 hours ago, falcaineer said: Unless you cut it too short and wind up with 6 extra drops! But that would make a good entry for this thread. ? ??? definitely don’t want those 6 drops. You’ll be screwed! Edited August 12, 2018 by js1990 falcaineer 1 Link to comment Share on other sites More sharing options...
ChristopherOrris24 Posted August 15, 2018 Share Posted August 15, 2018 Longer tubes are no issue, and definitely help get those last few drops of product. I am however frustrated with this batch of “lower quality” sprayers. Broke one just a few sprays into a bottle of rubber cleaner I called customer service to discuss them, and word is they thought they had a pallet of the good quality sprayers, then last minute they realized they were out, they had to purchase the lower quality sprayers to get by and orders moving. Good sprayers are on order and coming I even recommended a potential “Pro” sprayer that id pay a few extra bucks for, guaranteed to be amazing and permanent. Given that the sprayers are used in almost every chemical Customer service is amazing, we ended up chatting for half an hour. I’d reach out them in a heartbeat Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now