Can I use revive hand polish and SHR with PC?

[Cjm005]

I bought the hand wash and wax kit a few weeks ago but realized this hand wax stuff is for the birds. I have a PC now, can I use up my RHP and SHR with my PC? Can I just order the MFP?

[SonicHD]

Yes to all of the above

[Kingsford]

I use the Fine Machine Polish and White Pad with a few drops of Revive. I find it helps remove the FMP and it also gives it a little bit of a different type of shine.

[Chase@InsanePaint]

Revive can be used like Jason says. OR, the other way we've seen success with it, is on the gray pad, ran at a lower setting, like on 2-3. But originally, it was designed to be used by hand.

[GerryC]

I use 50/50 Revive/SHR on a white pad to do light maintenance and restore clarity if the vehicle has already been fully corrected.

 

Every car's finish is different though, harder clearcoats won't respond well to this ratio/pad combo. Feel free to experiment

[Z71_Denali]

depends on what your polishing. SHR with a little FMP on the orange or white pad for minor correction, FMP and a little Revive on a white pad for final polishing step, and you can even do Revive on the grey pad as a final polish step (won't need to get the IPA out before laying sealant if you do this). Revive is similar to what other brands call a cleaner polish, it will leave the paint completely bare once its buffed off.

[Green Machine]

But you have to realize that hand waxing or polishing a car is like a ritual! You get to relax smoke a cigar and see what your hard work has produced!!!! That's how I think of it!

[Cjm005]

I really have few scratches as the car is a garage queen so I can probably start with FMP and work back if needed?

[Chris@Adams]

I really have few scratches as the car is a garage queen so I can probably start with FMP and work back if needed?

Yes always start with the lesser product & pad.